A Hypothesis Testing of Archwire Rounding for the Efficacy of Torque Springs in Orthodontics: A Finite Element Study.

BACKGROUND: Achieving the proper buccolingual inclination of teeth is a cornerstone in orthodontic treatment, directly impacting the attainment of ideal occlusal relationships and long-term stability. A practical torque expression that moves the tooth in its proper position across all three planes is imperative to finish orthodontic cases optimally. The primary focus of this research is to investigate Burstone's hypothesis about Warren torque springs when applied to the rectangular wire. Additionally, it examines the hypothesis of rounding these wires in between the bracket wings of the target tooth to be moved. This study aims to determine whether the rounding of wires, in conjunction with the use of torque springs, influences orthodontic outcomes, addressing a notable gap in current literature and resolving controversies in orthodontic practice. METHODS: A three-dimensional set of maxillary teeth was modeled. A 0.022" MiniSprint™ brackets and Stainless steel archwires of 0.019" × 0.025" and 0.017" × 0.025" (Forestadent, Pforzheim, Germany) were generated. Warren torque spring was modeled and used in the simulation on the upper right central incisor. Four case scenarios were simulated. In two scenarios, the archwires were untouched for both archwire sizes. In comparison, in the other two scenarios, each archwire size was rounded for the upper right maxillary incisor bracket area. Stresses in the Warren torque springs were calculated, the root tip displacement in the four scenarios was measured in millimeters, and both were analyzed. RESULTS: The root tip displacement was highly affected by rounding the archwire. The increase in root tip displacement was 1538% for the Warren torque spring on 0.019" × 0.025" and 783% for 0.017" × 0.025". The amount of root tip displacement was about 18.8 mm for 0.017" × 0.025" with rounding and 12.2 mm for 0.019" × 0.025". The concentration of the stresses in the Warren torque spring was in the neck of the spring next to the coils. CONCLUSION: Rounding the archwires while using the Warren torque spring on a rectangular archwire will increase the efficiency of the spring and, in turn, will exhibit more torque on the tooth. Smaller dimensions of rectangular archwires will give more torque in conjunction with Warren torque springs compared to larger sizes of archwires.

Dental and Periodontal Changes After Accelerated Correction of Lower Anterior Teeth Crowding With Periodontally Accelerated Osteogenic Orthodontics (PAOO) Procedure: A Randomized Controlled Trial.

Objective To evaluate the relative efficacy of periodontally accelerated osteogenic orthodontics (PAOO) compared to conventional fixed appliances in correcting lower anterior teeth crowding using a non-extraction treatment approach. Material and methods A single-center, two-arm, parallel-group randomized controlled trial was conducted on 38 patients (9 males, 29 females) with moderate crowding. These patients did not require premolar extraction and were randomly allocated into two treatment groups: the PAOO group and the conventional orthodontic treatment group. The Little Irregularity Index (LII) measured crowding intensity on pre-treatment study models. Changes in this index were recorded monthly in both treatment groups. The inter-canine width, inter-second-premolar width, plaque index (PI), gingival index (GI), and papillary bleeding index (PBI) were also measured before and after the leveling and alignment stage. Statistical analysis between the two groups was performed using Mann-Whitney U tests. Results For the LII, the average time for irregularity resolution was three months in the PAOO group, compared to five months in the conventional orthodontic treatment group. Regarding changes in inter-second-premolar width, the PAOO procedure led to a significant decrease in the increase of inter-second-premolar width, with an average increase of +1.52 mm compared to +2.71 mm in the control group. For the GI and PBI, it was found that their values significantly increased with PAOO application, averaging 0.18 and 0.17, respectively, compared to 0.05 and 0.07 in the control group. Conclusions The use of PAOO in orthodontic treatment accelerated the leveling and alignment process by 40%. Changes in the inter-canine width, the inter-second-premolar width, and the status of periodontal tissues were minimal and clinically negligible.

Integrated Care Strategies for Unilateral Cleft Lip and Palate: A Multidisciplinary Treatment Approach for Profile Correction.

Cleft lip and palate (CLP) is a prevalent congenital craniofacial deformity that can be unilateral or bilateral. This case report highlights the interdisciplinary approach to managing a 24-year-old male with unilateral CLP (UCLP), emphasizing the complexity of associated dental and skeletal challenges. The patient had undergone multiple surgeries, including lip closure at three months, palate repair at seven years, and alveolar bone grafting at 12 years. Clinical assessments revealed a retruded maxilla, an absence of lateral incisors, and scars from previous surgeries. Radiographic evaluations indicated a Class III skeletal pattern and confirmed the presence of a cleft on the left side. Orthodontic treatment commenced with maxillary arch alignment, followed by Le Fort I surgery to address maxillary retrusion, correct skeletal malocclusion, and close the alveolar cleft space. The post-surgical phase involved orthodontic adjustments, crossbite correction, and alignment of the mandibular arch. Despite the discontinuation of treatment due to the patient's relocation, the interdisciplinary collaboration achieved significant improvements, including a corrected facial profile, maxillary advancement, closure of the cleft space, and enhanced dental alignment. The patient's confidence and functionality were positively impacted. This case underscores the importance of a coordinated interdisciplinary approach to addressing the multifaceted challenges associated with UCLP, aiming to optimize both aesthetic and functional outcomes for improved patient well-being.

Evaluation of Micro-Osteoperforations in Expediting Orthodontic Tooth Movement in Adult Patients.

Background: Orthodontic tooth movement, the process of aligning teeth, can often be time-consuming, particularly in adult patients. Micro-osteoperforations (MOPs) have emerged as a potential technique to accelerate this process. Materials and Methods: A sample of 30 adult patients undergoing orthodontic treatment was selected. The patients were divided into two groups: an experimental group (EG) receiving MOPs and a control group (CG) without MOPs. Standard orthodontic treatment was administered to both groups. The rate of tooth movement was measured using digital models and recorded in millimeters per month. Pain levels reported by patients were also noted. The data were analyzed using basic statistical methods. Results: The EG demonstrated a significantly higher rate of orthodontic tooth movement compared to the CG. The average rate of tooth movement in the EG was 1.5 millimeters per month, while the CG exhibited an average rate of 0.8 millimeters per month. Additionally, pain levels reported by patients in the EG were slightly elevated immediately after MOPs but subsided within a few days. Conclusion: The findings of this study suggest that MOPs can effectively expedite orthodontic tooth movement in adult patients.

Comparison of Friction Produced at Backet-Wire Interface in Monocrystalline Ceramic Brackets of 8 Different Brands: An In Vitro Study.

Introduction: The esthetic during the various orthodontic treatments has led to the invention of the brackets. When different ceramic brackets and archwires are used, the different frictional forces may result in the different outputs. Hence, in the present study, we evaluated and compared the frictional resistance between eight standard monocrystalline ceramic bracket models and each of the archwires of four different alloys. Materials and Methods: Frictional force was tested using Instron testing machine, in vitro, for eight types of monocrystalline ceramic bracket, and four types of archwires beta-titanium, NiTi, copper-nickel-titanium, and stainless steel statistical analysis were done using various tools, and significance value of <0.05 was considered. Results: Ormco and AO (Radiance) monocrystalline ceramic brackets created lesser frictional resistance than other monocrystalline ceramic brackets. Stainless steel archwire generates lesser static friction. Beta-titanium archwire created higher static friction. A 0.017 × 0.025 inch stainless steel archwire generates lesser static friction to 0.019 × 0.025 inch TMA. Conclusion: It can be concluded that Ormco and AO (Radiance) monocrystalline ceramic brackets, with stainless steel archwires and of size 0.017 × 0.025 inch, can generate better forces when used for the orthodontic tooth movements.

Effectiveness of Miniscrew-Supported Molar Intrusion: A Clinical Study.

Mini-screws, also known as temporary anchorage devices (TADs), offer enhanced control and versatility in orthodontic treatment by providing stable anchorage points. This clinical study aims to evaluate the effectiveness of mini-screw-supported molar intrusion in orthodontic practice. For this clinical study, a cohort of 40 orthodontic patients with various malocclusions requiring molar intrusion as part of their treatment plan was recruited. The age range of the participants spanned from 14 to 35 years, representing a diverse patient population. The intervention involved the implementation of mini-screw-supported molar intrusion on one side of the maxillary arch in each patient. To achieve this, temporary mini-screws were strategically placed, and a combination of orthodontic forces and mini-screw anchorage was employed to intrude the molars. The primary outcome measure for this study was the amount of molar intrusion achieved, which was quantified in millimeters from the initial evaluation to the final visit. Additionally, the duration of treatment required to achieve the desired molar intrusion was recorded in months. The results of this clinical study demonstrated that mini-screw-supported molar intrusion was an effective and safe orthodontic technique. On average, a significant mean molar intrusion amount of 4.8 mm (standard deviation [SD] ± 0.6) was achieved with the mini-screw-supported approach. Furthermore, the treatment duration required to attain the desired molar intrusion was relatively short, with a mean of 6.2 months (SD ± 1.1). In conclusion, this clinical study provides evidence that mini-screw-supported molar intrusion is an effective and safe approach in orthodontic practice. It offers orthodontists the advantage of enhanced control and predictability in molar intrusion procedures.

The Impact of Early Orthodontic Intervention on Dental and Skeletal Development in Children with Mixed Dentition.

Background: The mixed dentition stage in children is a critical period for orthodontic assessment and intervention. This study investigates the effects of interceptive orthodontics on dental and skeletal development in children with mixed dentition, aiming to evaluate the potential benefits of early orthodontic treatment. Materials and Methods: A retrospective analysis was conducted on a cohort of 150 children with mixed dentition (aged 7-11 years), who received interceptive orthodontic treatment. Dental and skeletal records, including cephalometric radiographs and dental cast models, were collected before and after treatment. A control group of 150 untreated children with mixed dentition was also assessed for comparison. Various dental and skeletal parameters, such as dental alignment, overjet (OJ), overbite (OB), and cephalometric measurements, were recorded and analyzed. Results: The results of this study indicate significant improvements in dental alignment and occlusion in the group of children who received interceptive orthodontic treatment. The average reduction in OJ was 3.5 mm, and the OB correction averaged 2.1 mm. Cephalometric analysis showed positive changes in skeletal relationships, with a mean reduction in the angle formed by point A, nasion (N) and point B. (ANB) angle of 2.8 degrees. These improvements were statistically significant compared to the control group (P < 0.05). Conclusion: Early orthodontic intervention, such as interceptive orthodontics, has a positive impact on dental and skeletal development in children with mixed dentition.

Assessment of AI Models in Predicting Treatment Outcomes in Orthodontics.

Background: In the realm of orthodontics, the evaluation of treatment outcomes is a pivotal aspect. In recent times, artificial intelligence (AI) models have garnered attention as potential tools for predicting these outcomes. These AI models have the potential to enhance treatment planning and decision-making processes. However, a comprehensive assessment of their effectiveness and accuracy is essential before their widespread integration. Materials and Methods: In this study, we assessed the capability of AI models to predict treatment outcomes in orthodontics. A sample of 30 patients undergoing orthodontic treatment was selected. Various patient-specific parameters, including age, initial malocclusion severity, and treatment approach, were collected. The AI model was trained using a dataset comprising historical treatment cases and their respective outcomes. Subsequently, the trained AI model was applied to predict the treatment outcomes for the selected patients. Results: The results of this study indicated a moderate level of accuracy in the predictions made by the AI model. Out of the 30 patients, the model accurately predicted treatment outcomes for 22 patients, yielding a success rate of approximately 73%. However, the model exhibited limitations in accurately predicting outcomes for cases involving complex malocclusions or those requiring non-standard treatment approaches. Conclusion: In conclusion, this study underscores the potential of AI models in predicting treatment outcomes in orthodontics. While the AI model demonstrated promising accuracy in the majority of cases, its efficacy was diminished in complex and non-standard cases. Therefore, while AI models can serve as valuable tools to aid orthodontists in treatment planning, they should be utilized in conjunction with clinical expertise to ensure optimal decision-making and patient care.

Comparing Torque Transmission of Different Bracket Systems in Combination with Various Archwires Considering Play in the Bracket Slot: An In Vitro Study.

This study aims to examine the play between various archwires and bracket systems, exploring potential variations in angle values for specific torque and torque values for a given angle along different bracket systems. Therefore, seven brackets systems were evaluated in conjunction with different stainless steel archwires of varying dimensions (0.016″ × 0.022″, 0.018″ × 0.025″, and 0.019″ × 0.025″). Biomechanical behavior during torque development and transmission was assessed using a six-component force/torque sensor. Torque angles (5-45°) were specified with subsequent torque measurement, and the sequence was reversed by setting the torque (5-30 Nmm) and measuring the angle. A reference measurement with 0 Nmm torque served to evaluate bracket slot play. Bracket play (0 Nmm) during palatal load ranged between 20.06° and 32.50° for 0.016″ × 0.022″ wire, 12.83° and 21.11° for 0.018″ × 0.025″ wire, and 8.39° and 18.73° for 0.019″ × 0.025″ wire. The BioQuick® bracket exhibited the highest play, while Wave SL® and Damon® Q brackets demonstrated the lowest play (p < 0.001). Significant differences (p < 0.001) between the brackets were observed in the torque angles required to achieve torques of 5-20 Nmm. In summary, each bracket system has a different torque transmission, which is of great clinical importance in order to achieve correct torque transmission and avoid complications such as root resorption.

Assessment of the quality and accuracy of information contained within the websites of marketed orthodontic products: a cross-sectional investigation.

OBJECTIVES: To assess the quality and accuracy of information contained within the websites of providers of marketed orthodontic products. MATERIALS AND METHODS: Twenty-one websites of orthodontic appliance and adjunct (product) providers were identified. The website content was assessed via two validated quality-of-information instruments (DISCERN and the Journal of the American Medical Association [JAMA] benchmarks) and an accuracy-of-information instrument. Website content was qualitatively analyzed for themes and subthemes. RESULTS: More than half (n = 11; 52.3%) of the assessed websites contained clinician testimonials. The mean (SD) DISCERN score was 33.14 (5.44). No website recorded the minimum of three JAMA benchmarks required to indicate reliability. The most common content themes related to quality-of-life impact and treatment duration. Just 8% of the statements within the websites were objectively true. The Pearson correlation coefficient indicated that the DISCERN scores were correlated with the accuracy-of-information scores (r = .83; P < .001). CONCLUSIONS: The quality and accuracy of information contained within the websites of the providers of marketed orthodontic products was poor. The combined use of DISCERN and the accuracy-of-information instrument may help overcome the shortcomings of each. Clinicians should check the accuracy of information on orthodontic product provider websites before adding links to those websites on their own sites.

Duration of orthodontic treatment with clear aligners versus fixed appliances in crowding cases: a systematic review.

OBJECTIVE: To critically appraise and assess the currently observed evidence about the difference in orthodontic treatment duration between clear aligners and fixed appliances in crowding cases. MATERIALS AND METHODS: An electronic search without limitations was conducted from inception to June 2023 covering nine databases: The Cochrane Central Register of Controlled Trials (CENTRAL), PubMed, Scopus, Web of Science, Google Scholar, Trip, CINAHL via EBSCO, EMBASE via OVID and ProQuest. Randomized controlled trials (RCTs) and matched non-randomized studies were included in this systematic review. Risk of Bias was assessed via Cochrane's tool (RoB 2) for RCTs and ROBINS-I tool for non-randomized studies. The Grading of Recommendations Assessment, Development, and Evaluation (GRADE) framework was employed to evaluate the overall quality of evidence. RESULTS: Out of the 3537 articles initially identified, ten eligible studies were included in this systematic review; six were RCTs. Only one study offered extraction-based treatment, while the other nine adopted non-extraction treatments. According to the GRADE, there is low evidence that treatment duration in mild to moderate crowding cases with clear aligners is similar to that in fixed orthodontic appliances. Meta-analysis was not administered due to high inconsistency. CONCLUSIONS: Based on currently available information, there was no significant difference in the treatment duration between the CA and FA groups in mild to moderate crowding cases. Further well-performed RCTs, especially in severe cases, are required. CLINICAL RELEVANCE: Time efficiency is an essential outcome measure for clinical orthodontic practice. While the type of appliance used is a critical determinant of treatment duration, orthodontists should be aware of other factors that can significantly impact treatment time, such as patient and treatment-related factors.

Orthodontists on Social Media: Instagram's Influence.

Objective: The aim of this study was to determine how orthodontists utilize the social media application Instagram for health communication. Methods: Four Turkish keywords were manually searched on the Instagram platform on February 12, 2022: "orthodontist" (ortodontist), "orthodontics" (ortodonti), "orthodontic specialist" (ortodonti uzmani), and "doctor of orthodontist" (ortodonti doktoru). A total of 195 orthodontist accounts matching the inclusion criteria were divided into two groups: public and private. Profile information analyses were performed, and the results for public and private accounts were compared. Public accounts were further divided by gender and whether they shared a company name in their profiles. Groups were compared according to post content and type of patient photo. Statistical analysis involved the Shapiro-Wilk test, an Independent Samples t-test, the Mann-Whitney U test, and chi-square and Kappa tests. Results: The number of posts (96.06±149.30 vs. 195.36±248.51) and followers (1,250.56±2,347.47 vs. 4,071.43±6,557.63) were higher for public accounts. The number of followers (3,171.62±4,645.08 vs. 5,472.57±8,595.99) and daily posts (0.17±0.37 vs. 0.23±0.43) were higher for accounts with a company name. In the content analysis, posts on clear aligners (1.51±4.74 vs. 6.60±18.60, p<0.05) and patient and company advertisements were more common (0.49±1.85 vs. 3.70±10.70, p<0.05) for accounts with a company name. Conclusion: While public orthodontist accounts commonly promote fixed mechanics as a treatment option, accounts with a company name adopt a different approach, emphasizing the sharing of information about clear aligners.

Evaluation of the Quality and Reliability of YouTubeTM Videos Created by Orthodontists as an Information Source for Clear Aligners.

Objective: This study aimed to evaluate the quality, reliability, and content usefulness of videos created by orthodontists on clear orthodontic aligners. Methods: Videos were screened using YouTubeTM by conducting a search for "Invisalign". After a preliminary evaluation of the first 250 results, 61 videos that met the selection criteria were scored and their length, days since upload, and numbers of views, likes, dislikes, and comments were recorded. These data were used to calculate the interaction index and viewing rate. Video reliability was assessed using a five-item modified DISCERN index, and video quality was assessed using the Video Information and Quality Index. A 10-item content usefulness index was created to determine the usefulness of the video content. Descriptive statistics of the parameters were calculated, and correlation coefficients were calculated to evaluate the relationships between the parameters. Results: The mean reliability score was 2.75±1.02 (out of 5), and the total quality score was 11.80±3.38 (out of 20). The total content usefulness index was quite low, with a mean score of 2.52±2.14 (out of 10). Interaction index and viewing rate were positively correlated with reliability score (r=0.463, p<0.01; r=0.295, p<0.05) and total quality score (r=0.365, p<0.01; r=0.295, p<0.01, respectively). The reliability score was positively correlated with the total quality score (r=0.842, p<0.01) and total content usefulness index (r=0.346, p<0.01). Conclusion: Videos about orthodontic aligner treatment have average reliability and quality but largely insufficient content.

Contributions of Digital Simulation to Orthodontic Therapeutic Decision-Making: A Case Report.

Adult orthodontics aims to achieve optimal functional and aesthetic corrections. However, for several reasons, some patients will wish to benefit from a limited treatment where only certain aspects of a malocclusion will be corrected. In these clinical situations, the therapeutic objectives must be adjusted to the individual needs of the patient insofar as they can bring them real benefits. The use of digital technology makes it possible to study the therapeutic possibilities better and visualize the occlusal results before choosing the best therapeutic approach, especially in cases requiring customization. The aim of this clinical case report is to illustrate the orthodontic compromise made after the analysis of the digital setup in an adult patient who presented with a class III malocclusion but refused orthodontic-surgical therapy and requested an alternative treatment.

Impact of treament with orthodontic aligners on the oral health-related quality of life.

BACKGROUND: There is an increasing interest in information on the effects of orthodontic aligners on the oral health-related quality of life (OHRQoL) of people. AIM: To compare the impact of orthodontic aligners versus conventional fixed appliances on OHRQoL, using a validated tool and controlling for sociodemographic and clinical variables. METHOD: Sixty-one individuals participated in this study. Group 1 (G1) consisted of 33 individuals under treatment with orthodontic aligners and Group 2 (G2) comprised 28 individuals under treatment with conventional fixed appliances. OHRQoL was evaluated with the Oral Health Impact Profile (OHIP-14) in which 14 items are distributed across seven dimensions: functional limitation, physical pain, psychological discomfort, physical disability, psychological disability, social disability, and handicap. The higher the score, the more negative is the perception of the individual regarding his/her OHRQoL. Descriptive statistics, Mann-Whitney test, and Poisson regression were performed. Effect Size (ES) and Minimal Clinically Important Difference (MCID) were also determined. RESULTS: Participants' mean age was 30.69 years. Individuals in G1 had a significantly lower score for physical pain and the total score of OHIP-14 compared to individuals in G2 (p < 0.05). The ES was large (ES = 0.74) for physical pain and moderate (ES = 0.46) for the total score. The ES was moderate for physical disability (ES = 0.50). The difference between groups for physical pain (1.30) and for physical disability (0.90) was greater than the MCID (0.87 and 0.88, respectively). Poisson regression showed that G2 individuals showed a score for physical pain 1.39 times higher than those of G1 in the adjusted model (OR = 1.39, [1.03-1.89], p = 0.031). CONCLUSION: Those under treatment with orthodontic aligners have a more positive perception of OHRQoL compared to those wearing fixed appliances.

Effect of laser corticotomy on canine retraction rate: a split-mouth randomized clinical trial.

BACKGROUND: This study assessed the effect of corticotomy with Er: YAG (erbium-doped yttrium aluminium garnet) laser on the rate of canine retraction. METHODS: This randomized split-mouth controlled clinical trial was conducted on 12 patients undergoing orthodontic treatment with extraction of maxillary first premolars. Following initial leveling and alignment, an alginate impression was made from the maxillary arch, and Er: YAG laser corticotomy was performed in one of the maxillary quadrants of each patient. Canine retraction was started immediately after corticotomy by placement of nickel-titanium (NiTi) closed coil springs at both sides. At the end of each month, alginate records were repeated for 4 months. Study models were scanned, and the anteroposterior movement of canine was quantified bilaterally. Pain was also measured by a visual analog scale (VAS). Probing depth (PPD) of canines and two adjacent teeth was also evaluated and pulp vitality was assessed by performing the cold test. Data were analyzed by paired and independent t-test and one-way ANOVA (alpha = 0.05). RESULTS: The rate of canine retraction was significantly greater in the laser-assisted corticotomy quadrant than the control (P < 0.05). No significant difference existed in posterior anchorage loss, canine rotation angle, PPD, pulp vitality, or pain score between two groups (P > 0.05). CONCLUSIONS: Flapless Er: YAG laser corticotomy significantly enhanced canine retraction rate with no adverse effect on other parameters.

In Vitro Study on the Influence of the Buccal Surface Convexity of the Tooth upon Enamel Loss after Bracket Removal.

Polishing after the removal of brackets is the final step in orthodontic treatment. It is simple to perform, though some studies have reported that polishing causes damage to the enamel surface. An in vitro study was made of the influence of the buccal surface convexity of the tooth upon possible enamel loss when the remaining resin and adhesive are removed after bracket decementing using two different polishing modes: a tungsten carbide bur at low and high speeds. The convexity of the buccal surface was quantified in 30 incisors and 30 premolars. A stereoscopic microscope was used to obtain photographs of the profile of the crown, and Image J software was used to calculate convexity by dividing the length of a line from the cementoenamel junction to the incisal margin by another line from the mentioned junction to the maximum convexity of the buccal surface. Brackets were cemented on all the teeth and were decemented 24 h later. In both groups, the residual composite was removed with a tungsten carbide bur at a low speed in one-half of the teeth and at a high speed in the other half. The buccal surface of each tooth was then photographed again, and the convexity was calculated and compared against the baseline value. The difference between the two values were taken to represent the enamel loss. The convexity of the premolars was significantly greater than that of the incisors, but this did not result in greater enamel loss when the same polishing mode was used. However, the tungsten carbide bur at a high speed proved more aggressive, causing significantly greater enamel loss than when used at a low speed.

Orthodontists' use of remote monitoring platforms pre-, amid, and post-COVID-19: a survey study.

BACKGROUND: Did the COVID-19 pandemic affect orthodontists' use of remote monitoring platforms? The goal of this research was to examine orthodontists' experiences implementing remote monitoring platforms before, during, and after the initial COVID-19 lockdown. METHODS: In this descriptive cross-sectional survey study, an electronic, anonymous questionnaire consisting of a series of 31 short-answer and multiple-choice questions was administered to an international sampling of practicing orthodontists. The target population in the study included currently practicing orthodontists who were graduates of an accredited orthodontic residency program. Participants were recruited in 2021 through collaboration with the American Association of Orthodontists (AAO) Partners in Research Program and the Harvard School of Dental Medicine Orthodontic Alumni Association. Descriptive analysis was conducted, reporting frequency (N and %) distributions for each question. The questionnaire aimed to describe whether orthodontists incorporated remote monitoring platforms into their practices, their experiences doing so, and if the COVID-19 pandemic influenced their use of these resources. RESULTS: Orthodontists' use of remote monitoring platforms was negligible prior to the pandemic; however, a quarter of surveyed orthodontists began using a remote monitoring platform during COVID-19 and nearly all respondents plan to continue using remote monitoring for the foreseeable future. Approximately half of orthodontists believe most patients' treatment progress can be monitored to the standard of care between in-person orthodontic appointments using remote monitoring platforms. Half of the orthodontists who do not currently use a remote monitoring platform in their practice are interested in learning more about how to implement one. CONCLUSIONS: The COVID-19 pandemic led to an increase in the interest and adoption of remote monitoring platforms in orthodontic practices. Most orthodontists had not incorporated remote monitoring platforms into their practices prior to the COVID-19 pandemic. However, this study revealed that a subset of orthodontists utilized the pandemic as motivation to incorporate remote monitoring into their practices and an additional group of orthodontists were interested in incorporating one in the future. Remote monitoring platforms garnered interest and importance with the arrival of the COVID-19 pandemic and may only have an increasing role in the field in years to come.

The Role of Interproximal Reduction (IPR) in Clear Aligner Therapy: A Critical Analysis of Indications, Techniques, and Outcomes.

Interproximal reduction (IPR) has become a standard practice in orthodontic treatment, particularly in the clear aligner therapy. It became an integral part of the digital plan when using clear aligners. Given the irreversible nature of IPR, precise planning and performance is essential. This article aims to analyze and summarize the existing literature on IPR in the context of clear aligners. The goal is to help clinicians to gain essential knowledge for safely and effectively navigating IPR. The review critically examines different perspectives found in the literature, covering indications, methods, and outcomes. Topics exploring the impact of IPR on treatment outcomes include space gaining, addressing tooth size discrepancies, tooth shape adjustments, resolving malocclusion, and enhancing aesthetics. Emphasizing precision of the procedure by the clinician and awareness of contraindications, the article also discusses the impact of IPR on patients. This includes considerations like increased pulp temperature, susceptibility to cavities due to changes in enamel roughness, effects on soft tissues, and post-IPR tooth sensitivity.

Treatment Efficiency of Maxillary and Mandibular Orovestibular Tooth Expansion and Compression Movements with the Invisalign® System in Adolescents and Adults.

OBJECTIVES: Aligners are an effective and esthetic orthodontic treatment option for permanent and mixed dentition. There are only a few studies dealing with the effectiveness of orovestibular tooth movement using aligners and applying adequate examination methods. In the present retrospective study, the aligner efficiency of orovestibular movements for the entire dentition was systematically evaluated using 3D superimposition, taking into account the influence of jaw, tooth type and Invisalign® system. METHODS: Group 1 (n = 18 adults, Invisalign®) and Group 2 (n = 17 adolescents, Invisalign® Teen) were treated with Invisalign® Ex30 aligner material and Invisalign® specific auxiliary means. In this non-interventional retrospective study, pre- and post-treatment maxillary and mandibular plaster cast models were scanned and superimposed with ClinChecks® via Surface-Surface Matching Algorithm on unmoved teeth providing stable references. Effectivity of planned versus clinically realized movements was evaluated for each tooth. Statistics were performed with a t-test and Bonferroni-Holm correction (α = 0.05). RESULTS: Orovestibular movement efficiency was excellent without statistical significance regarding jaw, tooth type or Invisalign® system. Mandibular translational tooth movements were highly effective, and outstanding for premolars (91-98%). Maxillary translational tooth movements were successful for incisors and premolars, but less effective for canines and molars. Almost all teeth were moderately or very effectively corrected by crown tipping, performing better for mandibular (70-92%) than maxillary (22-31%) canines as much as for adolescent upper front teeth (81-85%) and lower canines (92%). CONCLUSIONS: Aligners are able to effectively implement translational orovestibular movements, supported by tilting the crowns for even more efficient implementation of the movements. This phenomenon was observed in our studies for all teeth in both jaws, regardless of the Invisalign® system used. Treatment planning should nevertheless take into account the individual patient parameters with regard to the movements to be performed in order to make the aligner therapy as successful as possible in terms of realizing the desired therapeutic goal.